Fast Body clips can lower lap times by .1 seconds per lap. Results may vary
2.25mm USA high grade graphite materials for narrow design main chassis, 2.0mm for upper deck and 3.5mm front and rear shock towers.
2/4/6 deg caster insert is selectable to assembly to c-hub. Large open on c-hub...
lower bulkhead side A for either front or rear on the Destiny RX-10S
lower bulkhead side B for either front or rear on the Destiny RX-10S
Optional Aluminum Chassis for the Destiny RX-10S sedan made from 7075 T6 aluminum.
The Chassis is hard-coated aluminum with a laser etched Destiny logo.
Aluminum chassis weight of 88 grams vs 70 Grams on the stock...
Center motor mount for the Destiny RX-10S sedan.
Front upper LEFT side Bulkhead for the Destiny RX-10S sedan 7075 aluminum.
Front upper Right side Bulkhead for the Destiny RX-10S sedan 7075 aluminum.
Left Rear upper bulkhead for the Destiny RX-10S
Right Rear upper bulkhead for the Destiny RX-10S
This is a replacemnet front shock tower for the Destiny RX-10S sedan made from 3.5mm caronfiber.
2.25mm Carbon Chassis for the Destiny RX-10S .
This is the rear shock tower for the Destiny RX-10S sedan made from 3.5mm carbon fiber
Upper chassis plate for the RX10S sedan 2mm carbon fiber
RX10S Spring Steel Double Joint Drive Shaft Set, Front
Note: recommend you shrink wrap the barrel and rings
All prices are in USD. © 2017 XENON-USA. Sitemap
Powered by BigCommerce